7.3
Parameter Setting
Set the parameters of each CH.
(1) Setting procedure
Set from "Parameter" in the project window.
1.
Start "Parameter" from the project window.
Project window
Pull-down list type
Text box type
2.
Double-click the item to change the setting, and input the setting value.
• Items to input from the pull-down list
Double-click the item to set, to display the pull-down list. Select the item.
• Items to input from the text box
Double-click the item to set, and input the setting value.
3.
Set CH2 to CH4 with the operation in step 2.
[Intelligent Function Module]
CHAPTER 7 VARIOUS SETTINGS
module name
"Parameter"
7
41