Water Connections - Thermo Scientific EASYpure 1164 Series Operation Manual And Parts List

I
NSTALLATION
Note
The outlet of a gravity feed storage
reservoir must be above or at the
same level as the inlet of the
EASYpure UV/UF.
Caution
Wall composition, condition and con-
struction, as well as fastener type,
must be considered when mounting
this unit. The mounting surface and
fasteners selected must be capable of
supporting a minimum of 120 lbs.
Inadequate support and/or fasteners
may result in damage to mounting sur-
face and/or equipment. If you are
unsure of mounting surface composi-
tion, condition and construction or cor-
rect fasteners, consult your building
maintenance group or contractor.
12

Water Connections

Feedwater Connection
1. Locate the length of 3/8" O.D. tubing provided
with a quick disconnect insert on one end and a
3/8" O.D. X 1/4 NPT tubing adapter on the other.
2. Install the tubing adapter onto your incoming
water line. We recommend a customer supplied
shut off valve be installed in your feed water line.
Do not connect the feedwater to your EASYpure
UV/UF until you are told to do so. (See Initial
Operation.)