Environmental Conditions; Declaration Of Conformity - Thermo Scientific EASYpure 1164 Series Operation Manual And Parts List

Table of Contents

Advertisement

Environmental Conditions

Operating:
17°C - 27°C; 20% - 80% relative humidity,
non-condensing. Installation Category II (overvoltage) in accordance with
IEC 664. Pollution Degree 2 in accordance with IEC 664.
Altitude limit: 5,000 meters.
Storage:
-25°C - 65°C; 10% to 85% relative humidity.

Declaration of Conformity

We hereby declare under its sole responsibility that this product conforms
with the technical requirements of the following standards (230 volt mod-
els only):
EMC:
EN 61326
Safety: EN 61010-1
EN 61010-2-010
per the provisions of the Low Voltage Directive 73/23/EEC, as amended
by 93/68/EEC.
The authorized representative located within the European Community is:
Copies of the Declaration of Conformity are available upon request.
G
ENERAL
Electrical Equipment for Measurement,
Control, and Laboratory Use; Part I:
General Requirements
Safety Requirements for Electrical
Equipment for Measurement, Control
and Laboratory Use; Part I:
General Requirements
Part II: Particular Requirements for
Laboratory Equipment for the Heating
of Materials
Thermo Fisher Scientific
419 Sutton Road
Southend On Sea
Essex SS2 5PH
United Kingdom
S
PECIFICATIONS
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easypure d8611Easypure d8612-33Easypure d8613

Table of Contents