Display - Thermo Scientific EASYpure 1164 Series Operation Manual And Parts List

C
ONTROLS
flush has ended, the EASYpure UV/UF will return to the
Mode (Off, Run or Standby) it was in when you initiated
the flush. We recommend that you initiate a one minute
manual flush when starting up the EASYpure UV/UF
prior to your dayʼs work.

Display

When the EASYpure UV/UF is in run mode, the display
indicates the purity (in megohms-cm) of the water avail-
able for draw off. When the EASYpure UV/UF is in
Standby mode, the display will be dark and the Standby
LED will be lit. When the EASYpure UV/UF is in a Flush
mode, the display will be dark and the Manual/Extended
Flush LED will be either lit (indicating a one-minute
flush) or flashing (indicating a five-minute flush). During
an Automatic Flush, the Automatic Flush LED will be lit.
If the display indicates anything else, see the Trouble-
shooting section of this manual.
15