Configuring Time Settings; Set The Time Zone; Time Schedule Control (Tsc); Configure A Time Schedule Control (Tsc) Interval - Tunstall Lifeline Digital Installation Manual

5.4. Configuring time settings

5.4.1. Set the time zone

To set the time zone:
a) Go to Time.
b) Under Real Time Clock & Time Zone, select the correct time zone in the Time zone drop-down list.
c) If automatic daylight saving time is required, tick the Use automatic daylight saving time for local time checkbox.
d) If +1 hour offset is required, tick the Use default time compensation of +01.00 for local time checkbox.

5.4.2. Time Schedule Control (TSC)

The Time Schedule Control (TSC) is used to configure schedules for features and alarm handling. Associated features
and alarm handling functionality can be scheduled to be active on certain days of the week or during certain hours of
the day.

5.4.2.1. Configure a Time Schedule Control (TSC) interval

To configure a TSC interval:
a) Go to Time.
b) Under an appropriate Time Schedule Control, tick the Enabled checkbox to enable the TSC.
c) Under Interval Start, select a day of the week or every day in the Weekday drop-down list and set the Hours
(0-23), Minutes (0-59) and Seconds (0-59) fields to set the start time for the interval.
62