Tunstall Lifeline Digital Installation Manual page 29

want to select according to the Local configuration
menu, page 29.
d) Press the green Cancel button to exit programming
mode.
Menu position Announce-
ment
Yellow Extra button
1 "One"
2 "Two"
3 "Three"
4 "Four"
5 "Five"
1 "One"
2 "Two"
3 "Three"
4 "Four"
8 "Eight"
Red Alarm button
1 "One"
2 "Two"
3 "Three"
4-64 "Four" - " Six-
ty-four"
Green Cancel button
a.
If speech messages are disabled, beeps replace the announcements. For example, the device emits one beep for speaker volume, two beeps for
LED intensity and three beeps for radio test mode.
Description
a.
Adjust speaker volume
Adjust LED intensity
Radio test mode
Test cellular signal strength
Cellular status
Error code (default)
Check SIM card status
Check cellular network sta-
tus
Check cellular radio tech-
nology
Nexa/actuator pairing
mode
Radio sensor position 1
Radio sensor position 2
Radio sensor position 3
Radio sensor position 4-64
Go back / Exit
Section
Adjust speaker volume, page 41
Adjust LED intensity, page 42
Test the radio range of a peripheral,
page 39
Check cellular signal strength, page
30
Checking cellular network status,
page 31
Check cellular network error code,
page 31
Check SIM card status, page 31
Check network status, page 32
Check cellular radio technology
(RAT), page 33
Connecting and disconnecting Nexa
smart plugs, page 43
Connecting and disconnecting pe-
ripherals, page 34
29