Tunstall Lifeline Digital Quick Reference Manual

Quick reference guide for Lifeline Digital (022-25-9xx)
Yellow Extra button Green Cancel but-
ton
Enable programming mode:
a) Press and hold the green Cancel button, then press
and hold the red Alarm button and the yellow Extra
button.
b) Release all buttons when the device emits a rising
sound signal and announces "Programming mode",
The LED indicators start chaser sequence and the
button LEDs flash in unison.
c) You can now:
• Adjust speaker volume
• Adjust LED
• Activate Radio test mode
• Check cellular signal
• Connect a peripheral
• Disconnect a peripheral
Adjust speaker volume:
a) Press and hold the yellow Extra button.
b) When the device announces "One", release the but-
ton.
c) Adjust speaker volume:
• Press the red Alarm button to increase volume.
• Press the yellow Extra button to decrease volume.
d) Press the green cancel button to save settings and
exit.
346 80 21-61. V 01. R 06.2021.
Adjust LED intensity:
Red Alarm button
a) Press and hold the yellow Extra button.
b) When the device announces "Two", release the but-
ton.
c) Adjust LED intensity :
• Press the red Alarm button to increase LED intensi-
• Press the yellow Extra button to decrease LED in-
d) Press the green cancel button to save settings and
exit.
Radio test:
a) Press and hold the yellow Extra button.
b) When the device announces "Three", release the
button.
c) When the device announces "Radio test mode Acti-
vate transmitter now", activate/trigger the peripheral
you want to test:
d) Press the green cancel button to exit.
1
ty.
tensity.
Connected and battery is OK.
Not connected and battery is OK.
Connected but battery is low.
Not connected and battery is low.
© 2021 Tunstall Group Ltd.