Tunstall Lifeline Digital Installation Manual page 69

NOTE
The radio code is typically printed on a label attached to the peripheral. The decimal
radio code is used for "Connected radio (two-way)" (for example: 55.11.84.191), trinary for
"Connected radio legacy (two-way)" (for example: 33112231) and six-digits for "Tunstall
Classic (one-way)" (for example: 256449).
iii. Select sensor type in the Radio sensor type drop-down list:
• Connected radio (two-way) for decimal radio codes (for example: 55.11.84.191)
• Connected radio legacy (two-way) for trinary codes (for example: 33112231)
• Tunstall Classic (one-way) for six-digit radio codes (for example: 256449)
• Linked with previous record if the sensor is used to hold extended information from the previous radio
sensor. This is only relevant for radio sensors that requires more than one radio sensor position.
iv. Select an event code in accordance to the trigger type, in the Event 1 (main) drop-down list.
See Appendix D: Radio sensor events per trigger type, page 133 for a complete list of event codes accord-
ing to trigger type.
An event code notifies the system and the alarm receiver or ARC of what has happened.
v. If required, select a location in the Location code drop-down list.
A location code notifies the system and the alarm receiver or ARC where the event or alarm has been
triggered.
vi. Select trigger type in the Trigger type drop-down list.
d) Under Options, the following options are available:
• Enable event distribution from this radio sensor
◦ Select this option to enable event and alarm distribution from this radio sensor.
◦ Deselect this option to suppress event distribution, that is, the system will not distribute events from this
radio sensor to the ARC.
023-02-885 R1 023-02-885 R1
33112231 779 33112231
55.11.175.11 55.11.175.11
S200731100 S200731100
68005/01A8
779
256449
0916
Tunstall MyAmie
69