How To Set Up For The First Time - Tunstall CareAssist 68100/01 Manual

How to set up for the first time

To set up the CareAssist follow the below steps:
1. If the CareAssist is to be used as a portable device,
attach the belt clip to the back of the CareAssist and
then fit the screw to permanently fix it in place.
A – Back of the CareAssist with
the belt clip fixing points
C – Fit the screw to permanently
fix the belt clip
2. Connect the CareAssist to the USB charger provided
then plug it into a mains power socket and charge for an
initial period of 24 hours.
3. It is now advisable to perform a range test around the
building in which the CareAssist will be deployed to
ensure it provides sufficient coverage (see Radio Walk
Test on page 16 for details).
4. The antenna can be screwed
into the antenna port to
improve the radio range of the
unit. The Antenna does not
have to be used where the
radio coverage is sufficient.
You are now ready to program the CareAssist.
D6707281F
Programming and user guide
B – Squeeze the top of the
belt clip and fit in to the fixing
points
D – Belt clip is now fixed
Page 7 of 24