Tunstall Lifeline Digital Installation Manual page 92

e) Under Door Sensor > Door Close, enable the door sensor to detect when the door closes:
i. Select the door sensor in the Radio sensor drop-down list.
ii. If required, select sensor trigger type in the Trigger type drop-down list. Otherwise, select "Any" to keep
settings from the selected radio sensor.
iii. If required, select location of the sensor in the Location drop-down list. Otherwise, select "Any" to keep
settings from the selected radio sensor.
The activation time starts when the door closes. If the motion sensor detects movement before the activation
time has elapsed, the care recipient is considered to be within the property and no alarm is generated.
f) Under Motion sensor, enable the motion sensor:
i. Select the motion sensor in the Radio sensor drop-down list.
ii. If required, select sensor trigger type in the Trigger type drop-down list. Otherwise, select "Any" to keep
settings from the selected radio sensor.
iii. If required, select location of the sensor in the Location drop-down list. Otherwise, select "Any" to keep
settings from the selected radio sensor.
The motion sensor has two functions:
• If the motion sensor detects movement before the guard time has elapsed, the care recipient is considered to
still be at home and the guard time restarts. This is to prevent false alarms if the care recipient opens the door
but remains by the door or briefly goes back into the property.
• If the motion sensor detects movement before the activation time has elapsed, the care recipient is considered
to be within the property and no alarm is generated. VIPS is reset.
92