Table of Contents
Advertisement
G5562A, G5563A Bravo Platform Safety and Installation Guide
Figure
Full-size side shield installed on the Bravo Platform (side view)
2
1
3
Item
Description
1
Top cover attachment screw
2
Top cover
3
Backplate
4
Shield attachment screws (four)
5
Lightpost (Standard Light Curtain)
6
Shield deck-access window (three)
To install the side shield:
1
At the side of the Bravo Platform, remove the screw (1) that attaches the Bravo top
cover (2) to the Bravo backplate (3).
2
Use the screw provided with the side shield to secure the side shield to the Bravo
top cover.
3
Using the four attachment screws (4) provided, secure the side shield to the
lightpost (5).
4
Install covers on up to three deck-access windows (6) in the shield unless tubing or
cabling access is required through the given window. Three T20 M4 8-mm screws
secure each window cover to the rear shield to prevent access through the window
opening.
If applicable, route tubing or cables through a deck-access window where no cover
is installed.
2 Installing the Bravo Platform
Installing the Standard Light Curtain and shields
5
4
6
45
Advertisement
Table of Contents
