Agilent Technologies G5562A Safety And Installation Manual page 46

2 Installing the Bravo Platform
Installing the Standard Light Curtain and shields
Installing the lightposts
IMPORTANT
38
Step Procedure
1 Install the lightposts on the Bravo
Platform.
2 Connect the Standard Light Curtain
to the Bravo Platform.
3 Align the light beams.
4 Install the front and side shields.
5 Install the rear shield
To install the lightposts:
1
Position the foot of the left lightpost onto the Bravo front left base handle. To
ensure a snug fit, press the lightpost foot firmly from the front and the side.
Note: The glass panel of the lightpost should face toward the Bravo center front.
Ensure that the lightpost foot fits completely onto the Bravo base handle without any
gaps in space. Otherwise, you will not be able to align the light beams correctly.
Figure
Positioning a lightpost (side view and front view)
2
On the outer side of the lightpost foot, install the setscrew to lock the lightpost in
position, as the following figure shows (1).
G5562A, G5563A Bravo Platform Safety and Installation Guide
See...
"Installing the lightposts" on page 38
"Connecting the Standard Light
Curtain" on page 39
"Aligning the light beams" on page 40
•
"Installing the front shields" on
page 43
•
"Installing the side shields" on
page 44
"Installing the rear shield" on page 46
Bravo