Table of Contents
Advertisement
2 Installing the Bravo Platform
Connecting the Bravo Platform
IMPORTANT
Connecting the Bravo Platform
About this topic
Before you start
20
3
Ensure that the setscrews in the platepad tabs are recessed and not protruding into
the plate nest. Use a 1.5-mm hex wrench to back out any protruding setscrews.
A protruding setscrew will prevent proper seating of the labware in the platepad.
Figure
Setscrew in platepad tab
This topic provides basic connection instructions for the Bravo Platform.
Figure
Example of Bravo Platform basic connections
•
Make sure the laboratory setup requirements have been met.
•
Determine the placement of the Bravo Platform and computer. If the Bravo
Platform is integrated in a workstation, determine the Bravo deck location for the
external robot to hand off labware.
G5562A, G5563A Bravo Platform Safety and Installation Guide
Bravo
00223
Advertisement
Table of Contents
