Platform Control Box; To Start And Stop The Machine; Drive And Steer Control; Control Box - Standard - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
D
- Operation instructions

3 - Platform control box

3.1 - T
O START AND STOP THE MACHINE
To start the machine :
At the ground control box :
• The E-stop button on the ground control box must be in ON position (pulled out / activated).
• Turn the key on the control box activation selector switch ( 92 ) to the left to energize the
platform control box.
At the platform control box :
• Pull the E-stop button (46).
To stop the machine :
• Push in the E-stop button (46).
3.2 - D
RIVE AND STEER CONTROL

3.2.1 - Control box - Standard

Activate the controls and the Enable Switch simultaneously to perform the various movements.
Command
1
Driving .
Front-axle steering
1. When the platform is raised above 1,50 m(4 ft11 in), only micro-speed is possible
N.B.-:-T
78 4001001030

Drive and steer control

HE RELEASE OF THE SELECTORS AND
Push the movement joystick ( 108 ) forwards to move the machine
forwards.
Push the movement joystick ( 108 ) forwards to reverse the machine.
Push the front-axle steering selector thumb switch ( 108 ) to the right
to steer to the right.
Push the front-axle steering selector thumb switch ( 108 ) to the left to
steer to the left.
( )
OR JOYSTICKS CAUSES ALL MOVEMENT TO STOP
E 06.20
Action
USA / GB
.