Familiarisation With The Control Posts; Chassis Control Station; Platform Control Station - Haulotte COMPACT 8 Operating And Maintenance Instructions Manual

4
1/ Emergency assistance pull rod
2/ Hour counter/battery charge state
3/ Raising/lowering switch
6
7
5
3
4
9
10
8
2
1
Photo 9
34
Operating and maintenance instructions - COMPACT 8, 8W, 10N, 10, 12

4.3.1 - Familiarisation with the control posts

All the movements are controlled from a control box situated on the platform's
extension.
This is the main driving post ; it must not be moved to another place on the
platform otherwise the " FORWARD " and " REVERSE " controls may be inverted.
The control box situated on the chassis is a back-up or emergency post only.
NOTE : Do not execute any manoeuvres before having assimilated the ins-
tructions in Chapter 4.4, page 36.
It is essential to have very good knowledge of the characteristics and operation
of the machine, because some breakdowns can lead you to think that there is a
breakdown when it is the safety devices which are working correctly.

4.3.1.1 -Chassis control station

Photo 8
2
5

4.3.1.2 -Platform control station

1/ Emergency stop switch
2/ Selection of movement (low speed, high speed, elevating, lowering)
3/ Warning signal control
4/ Visual fault indicator: see Table 3.2.2.4, page 26
5/ Manipulator
6/ Steering control switch
7/ Dead man
8/ Visual indicator: travel
9/ Visual indicator: movement
10/ Visual indicator: weighing
3
4/ Control post activation key
5/ Revolving light (option)
1