Electric Shock Hazards - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
A
- Foreword

2.1.4 - Electric Shock Hazards

The machine is not electrically insulated and does not provide protection from contact or
proximity to electrically charged conductors.
Always position the lift at a safe distance from electrically charged conductors to ensure that
no part of the machine is within an unsafe area.
Respect the local rules and the minimum safety distance from power lines.
Electric voltage
0 - 300 V
300 V - 50 kV
50 - 200 kV
200 - 350 kV
350 - 500 kV
500 - 750 kV
750 - 1000 kV
N.B.-:-U
• Do not operate the machine when close to live power lines,
consider the movement of the machine and the sway of the
electric power lines particularly in windy conditions.
• Do not operate the machine during lightning, thunder-
storms, snow/ice or any weather condition that could com-
promise operator safety.
• The machine must not be used while charging the batteries.
• When using the platform AC power supply, ensure it is
protected with a circuit breaker and residual current device.
• Do not use the machine as a ground for welding.
• Do not weld on the machine without first disconnecting the
battery terminals.
• Always disconnect ground cable first.
Keep away from the machine if it contacts energized power
lines. Personnel on the ground or in the platform must not
touch or operate the machine until energized power lines are
shut off.
14 4001001030
Minimum safe approach distances
SE THIS TABLE EXCEPT WHERE LOCAL REGULATIONS INDICATE OTHERWISE
Minimum safety distance
Mètre
Avoid contact
3
5
6
8
11
14
E 06.20
Feet
10
15
20
25
35
45
.
USA / GB