Uncontrolled Movement Hazards - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
A
- Foreword
• Be aware of driving direction.
• Check the driving direction with the help of the red or green arrow on the chassis relative to the red and green
arrows on the platform control box.
• Also note that when changing the driving direction (Forward <> Reverse) the joysticks or switches must return
to the neutral position before reversing the drive direction and for movement to occur.
• When driving, position the platform so as to provide the best possible visibility and to avoid
any blind spots.
• Hold on securely to the guardrails.
• Personal fall protection equipment (PFPE) :
• Occupants must wear a safety harness, personal protective equipment and comply with the applicable national
regulations. Attach the safety harness lanyard to the designated anchorage points provided for this purpose on
the work platform.
• Operators must comply with the safety standards of the job site and the employer, as well as the applicable
state regulations relating to the use of personal protective equipment.
• All personal fall protection equipment (PFPE) must comply with current regulations, must be inspected and
used in accordance with the manufacturer's instructions.
• Avoid contact with fixed or mobile obstacles (other machines).
• Other machines (crane, aerial work platform, etc.) operating in the work area increase the
risk of crushing or collision. Restrict the operation of machines moving within the aerial work
platform work area.
• Take into consideration the stopping distance, reduced visibility and blind spots of the ma-
chine.
• Limit travel speed to suit the ground surface condition, slope (incline), and people in the vi-
cinity.

2.1.7 - Uncontrolled movement Hazards

Never use a damaged or malfunctioning machine.
Always respect the following rules :
• Maintain clearance from high voltage lines.
• Maintain clearance from generators, radar, electromagnetic fields.
• Never expose the batteries or electrical components to water (high pressure washer, rain).
16 4001001030 E 06.20 USA / GB