Operation From The Platform Control Box - Haulotte Compact 8 Operator's Manual

Hide thumbs Also See for Compact 8:
Table of Contents

Advertisement

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
D
- Operation instructions
1.3 -
O
PERATION FROM THE PLATFORM CONTROL BOX
• The platform control box can only be used if :
• The E-stop buttons on both ground and platform control boxes are not pressed in.
• Machine switched on at ground control box.
• Platform control box selected from ground control box.
• A faulty joystick is not taken into account to control a movement. If this fault disappears, the
movement is authorised again.
• An E-Stop button is present at each control box. When pushed in, it stops all functions
movements.
• An Enable switch ( 123 ) or Foot Switch in the basket ( 245 ) is present and should be acti-
vated to authorize one or more function movements. If the Enable Switch is kept active for
more than 8 seconds without selecting a function movement, then movement is disallowed.
The enable switch must be released (reset) before movement can occur.
• The release of "Enable switch" ( 123 ) or Foot pedal switch in the basket ( 245 ) while per-
forming a movement stops all the movements. The stop of movements is progressive. It
could restart only when the selected function switch/joystick is released to neutral position.
• All switches and joystick operating a movement, return automatically to neutral when re-
leased.
• The status of the switches and joysticks is tested automatically when the machine is
switched on. A switch or joystick will be active only after it has been detected in neutral po-
sition.
A buzzer beeps in the following conditions :
• Overload.
• Machine elevated on a slope greater than the rated slope.
• Indicators - All the indicators are tested
• When the machine is switched on.
While driving on a slope :
• Always orientate the machine in the direction of the slope.
• Stow the machine completely.
• Do not travel down slopes in high speed.
• Do not drive fast in narrow or cluttered areas. Keep speed under control while making turns or sharp
bends.
4001001030
E 06.20
USA / GB
75
A
B
C
D
E
F
G
H
I

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents