Wheel/Tire Assembly; Technical Specifications; Inspection And Maintenance - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
E
- General Specifications

4 - Wheel/Tire assembly

4.1 - T
ECHNICAL SPECIFICATIONS
COMPACT 8 - COMPACT 2032E - COMPACT 8W - COMPACT 2047E -
COMPACT 10N - COMPACT 2632E - COMPACT 10 - COMPACT 2747E -
COMPACT 12 - COMPACT 3347E - COMPACT 14 - COMPACT 3947E
Component
Reference number
Type
Size
Torque
4.2 - I
NSPECTION AND MAINTENANCE
Replace the wheels and the tires if any of the following
conditions exist :
• Presence of cracks, damage, deformation or other faults
on the hub
• Damage to the tire :
• Cut or hole > 3 cm (2 in) in the rubber side wall.
• Blister or pronounced lump on the external and lateral
wall.
• Damaged wheel stud.
• Damage or wear on the side wall to the extent that the
reinforcing wire is visible.
• Consistent wear of the ground contact surface greater
than 25%
Tires and rims are critical components for the stability of the machine. For safety reasons :
• Use only HAULOTTE® spare parts according to the technical characteristics of the machine. Refer to
the spare parts catalog.
• Do not replace factory-installed tires with tires of different specifications or ply rating.
104 4001001030
378 mm / 125 mm (14,8 in/ 4,9 in)
E 06.20
Standard wheel
Solideal
Solid tires/tyres
250 daN
USA / GB