Maintenance Support - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
B
- Familiarization
3.2 - M
AINTENANCE SUPPORT
The maintenance stand must be in place before any maintenance operation is begun.
COMPACT 8 (C 2032E) -
COMPACT 8W (C 2047E)
COMPACT 14 (C 3947E)
The maintenance support (on both sides of the
machine) must be put in place before any maintenance
operations.
Placing the machine in maintenance configuration :
• Lift scissor arms to a sufficient height to tilt the stand.
• Unscrew, rotate and put the stand in the vertical position.
• The stand should remain in the vertical position.
• Lower the scissor arms.
• Scissor arm pivoting rod should rest on the V groove of the stand.
Putting in use position :
• To put back the machine into its normal operation, reverse the steps used above.
28 4001001030
COMPACT 10 (C 2747E)
E 06.20
COMPACT 10N (C 2632E) -
COMPACT 10N-1
COMPACT 12
(C 3347E)
USA / GB