General - Haulotte Compact 8 Operator's Manual

Compact 8 (C 2032E) - Compact 8W (C 2047E) - Compact 10 (C 2747E) - Compact 10N (C 2632E) -
Compact 10N-1 - Compact 12 (C 3347E) - Compact 14 (C 3947E)
F
- Maintenance
Maintenance

1 - General

As an owner and/or operator of Haulotte equipment, your Safety is of utmost importance
to HAULOTTE® , which is why HAULOTTE® places such a high priority on product safety.
INSPECTIONS are not only required by HAULOTTE®, but may also be required by industry standards
and/or local regulations.
To ensure your equipment continues to achieve the level of performance set in the factory, it is
important to maintain it regularly. We remind you that it is strictly forbidden to make any modifications.
Regular and timely inspections will reduce equipment down time as well as prevent possible injury.
N.B.-:-DO NOT OPERATE
MACHINE OPERATION
Overview :
• Walk-around inspections take only a few minutes at the beginning and end of each shift – one of the
best ways to prevent mechanical problems and safety hazards.
What to Do :
• Use your senses: sight, smell, hearing and touch.
Frequency :
• Check your machine periodically during your entire workday.
• Make sure to do your inspection the same way every time.
• Complete one of these inspections at the start and end of each shift.
N.B.-:-I
F DAMAGE OR UNAUTHORIZED MODIFICATIONS ARE DISCOVERED
REMOVED FROM SERVICE UNTIL REPAIRS ARE MADE BY A QUALIFIED SERVICE TECHNICIAN
It is the owner's responsibility to ensure the required maintenance as recommended by Haulotte is
completed prior to the operation of the machine.
If regular maintenance is not carried out, this may :
• Void the warranty.
• Cause machine malfunction.
• Reduce machine reliability and shorten its service life.
• Jeopardize operator safety.
HAULOTTE Services® technicians are specially trained to carry out extensive repairs, interventions or
adjustments on the safety systems or elements of HAULOTTE® machines. They carry genuine
HAULOTTE spare parts and tools as required, and also provide fully documented reports on all work
completed.
The inspection and maintenance table, identifies the role and the responsibilities of each party in
periodical machine maintenance.
4001001030
UNLESS YOU ARE FAMILIAR AND TRAINED IN THE PRINCIPLES OF SAFE
.
Section C 3 - Inspection and Functional test.
E 06.20
,
THE MACHINE MUST BE
.
USA / GB 113
A
B
C
D
E
F
G
H
I