Overview Of The Ryz024A Pmod Example Project; Running The Ryz024A Pmod Example Project; Figure 1. Rsk-Rx65N-2Mb Setup With Ryz024A Pmod Board Connected - Renesas RX600 Series Quick Start Manual

Renesas RX Family
RYZ024A PMOD
Micro USB

Figure 1. RSK-RX65N-2MB Setup with RYZ024A PMOD Board Connected

4. Overview of the RYZ024A PMOD Example Project

The RYZ024A PMOD example project allows the user to activate, enable and test the RYZ024A PMOD
board and SIM card connectivity through a serial terminal menu.
When the RSK-RX65N-2MB board is running the RYZ024A PMOD example project and is connected to a
host PC via the serial port, the kit and RYZ024A PMOD information can be viewed, and the included SIM
card activation can be validated.

5. Running the RYZ024A PMOD Example Project

This section lists the requirements and instructions to power up the RSK-RX65N-2MB board, flash the
RSK-RX65N-2MB board and run the RYZ024A PMOD example project.
Hardware Requirements
•
RSK-RX65N-2MB board
•
2x Mini-B USB device cables
•
1x Micro-B USB device cable
•
A PC with at least two USB ports
•
RYZ024A PMOD board with external antenna
Software Requirements
•
®
Windows 10 operating system
•
Tera Term (or similar) serial terminal console application V4.106 or later
•
Renesas Flash Programmer V3.10.00 or later
•
RYZ024A PMOD example project Hex File (located in r21qs0009euxxxx-ryz024a-rsk-rx65n-2mb.zip >
ryz024a_quickstart_rx65n_2mb/ ryz024a_quickstart_rx65n_2mb.hex).
R21QS0009EU0100 Rev.1.00
Feb.22.23
RSK-RX65N-2MB – Quick Start Guide
RX65N-2MB Board
Mini-B USB
Cable
Debugger
Power Cable
E2 Lite
Page 7 of 18