Page 1
All information contained in these materials, including products and product specifications, represents information on the product at the time of publication and is subject to change by Renesas Electronics Corp. without notice. Please review the latest information published by Renesas Electronics Corp.
Page 2
Renesas Electronics disclaims any and all liability for any damages or losses incurred by you or any third parties arising from the use of any Renesas Electronics product that is inconsistent with any Renesas Electronics data sheet, user’s manual or other Renesas Electronics document.
Page 3
Unit Products The following usage notes are applicable to all Microprocessing unit and Microcontroller unit products from Renesas. For detailed usage notes on the products covered by this document, refer to the relevant sections of the document as well as any technical updates that have been issued for the products.
Page 4
Renesas or its affiliates shall in no event be liable for any loss of profit, loss of data, loss of contract, loss of business, damage to reputation or goodwill, any economic loss, any reprogramming or recall costs (whether the foregoing losses are direct or indirect) nor shall Renesas or its affiliates be liable for any other direct or indirect special, incidental or consequential damages arising out of or in relation to the use of this RX65N-2MB, even if Renesas or its affiliates have been advised of the possibility of such damages.
Figure 2. Creating a New Project on Renesas Flash Programmer ..............8 Figure 3. Enabling Auto Authentication ......................8 Figure 4. Main Window of Renesas Flash Programmer After Creating a New Project ........9 Figure 5. Connections to the RX65N-2MB Board After Flashing ..............10 Figure 6.
• Instructions for running the RYZ024A PMOD example project on the RSK-RX65N-2MB board. • Instructions for flashing the RYZ024A PMOD example project code using Renesas Flash Programmer. 1.1 Assumptions and Advisory Notes 1. Tool experience: It is assumed that the user has prior experience in using a serial terminal emulation program such as Tera Term.
Windows 10 operating system • Tera Term (or similar) serial terminal console application V4.106 or later • Renesas Flash Programmer V3.10.00 or later • RYZ024A PMOD example project Hex File (located in r21qs0009euxxxx-ryz024a-rsk-rx65n-2mb.zip > ryz024a_quickstart_rx65n_2mb/ ryz024a_quickstart_rx65n_2mb.hex). R21QS0009EU0100 Rev.1.00 Page 7 of 18...
Type-A end to the host PC. 3. Connect the power cable from the AC adapter to the power jack on the RSK-RX65N-2MB board (PWR). 4. Open Renesas Flash Programmer and create a new project by using the File menu and selecting New Project.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide Figure 4. Main Window of Renesas Flash Programmer After Creating a New Project 8. Click Start to begin flashing the example project code onto the board. Once completed, the message Operation completed should be printed and the status OK should be displayed next to the start button.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide 5.2 Connecting and Powering Up the RSK-RX65N-2MB Board 1. Connect the RYZ024A PMOD board (with attached external antenna) to PMOD1 connector labeled on the board. 2. Connect the Micro-B USB cable to RYZ024A (connector CN4) for external powering of PMOD and the type-A USB end of cable to a PC USB port.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide 5.3 Running the RYZ024A PMOD Example Project To run the RYZ024A PMOD example project, use the following instructions: 1. On the host PC, open Windows Device Manager. Expand Ports (COM & LPT), locate USB Serial Device (COMxx) and note the COM port number for reference in the next step.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide 3. Using the Setup menu pull-down, select Serial port… and ensure that the speed is set to 115200, as shown in Figure 8. Click New setting. Figure 8. Selecting 115200 on the Speed Pulldown 4.
Page 13
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide 6. Press ESC to return to the ‘Welcome and Main Menu’ screen. 7. Press 2 to display CAT-M Information. This menu will communicate with the RYZ024A PMOD module to obtain the ICCID value needed for activating the SIM card. Upon success, the IMEI and ICCID values will be displayed on the terminal screen.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide Figure 13. Validating SIM Activation – SIM Card Active 9. Press ESC to return to the ‘Welcome and Main Menu’ screen. 6. Activating the SIM Card To activate the included SIM card, please visit the Truphone SIM Activation platform at truphone.com/connectit...
This section includes a common set of issues and how to resolve them. The two types of issues that you may encounter are due to the hardware setup or SIM activation. The steps that follow will help to resolve those types of issues. For any other issue that cannot be resolved please contact Renesas support at Technical Support 7.1 Hardware Setup...
A micro-USB cable is plugged into the RYZ024A PMOD connector (CN4) and PC. 7.5 Contact Renesas Support For Starter Kit and RYZ024A PMOD related issues that cannot be resolved with these troubleshooting steps, please contact Renesas Support at renesas.com/support for more help.
Renesas RX Family RSK-RX65N-2MB – Quick Start Guide 9. Website and Support Visit the following URLs to learn about the kit and the RX family of microcontrollers, download tools and documentation, and get support. RSK-RX65N-2MB Resources renesas.com/rx/rsk-rx65n-2mb RX Product Information renesas.com/rx...