Connecting And Powering Up The Rsk-Rx65N-2Mb Board; Figure 5. Connections To The Rx65N-2Mb Board After Flashing - Renesas RX600 Series Quick Start Manual

Renesas RX Family

5.2 Connecting and Powering Up the RSK-RX65N-2MB Board

1. Connect the RYZ024A PMOD board (with attached external antenna) to PMOD1 connector labeled on
the board.
2. Connect the Micro-B USB cable to RYZ024A (connector CN4) for external powering of PMOD and the
type-A USB end of cable to a PC USB port.
3. Connect the Mini-B connector end of the USB device cable to the USB Mini-B port (G1CUSB0) of the
RSK-RX65N-2MB board and connect the type-A USB end of the cable to the USB port of the host PC.
4. Connect the power cable to the RSK-RX65N-2MB power jack (PWR). 5V_PWR and 3V3_PWR LEDs
should be turned on.

Figure 5. Connections to the RX65N-2MB Board After Flashing

R21QS0009EU0100 Rev.1.00
Feb.22.23
RSK-RX65N-2MB – Quick Start Guide
Page 10 of 18