Renesas RX600 Series Quick Start Manual page 13

Renesas RX Family
6. Press ESC to return to the 'Welcome and Main Menu' screen.
7. Press 2 to display CAT-M Information. This menu will communicate with the RYZ024A PMOD module
to obtain the ICCID value needed for activating the SIM card. Upon success, the IMEI and ICCID values
will be displayed on the terminal screen. The program will continue to attempt to communicate with the
RYZ024A PMOD module until it has successfully connected or timed out. After obtaining the ICCID
value, go to Truphone
card).
8. Press ESC to return to the 'Welcome and Main Menu' screen.
Press 3 to enter the Validate SIM activation screen. The program will attempt to ping the Quad9 server
(IP address 9.9.9.9) for a response to determine whether the SIM card has been activated. The steps of
a successful SIM validation are shown in Figure 12. Upon success, the text "** SIM card active! **" will
be displayed on the terminal screen (see Figure 13). If SIM card validation fails, follow the
Troubleshooting section.
R21QS0009EU0100 Rev.1.00
Feb.22.23
truphone.com/connectit
Figure 11. RYZ024A PMOD Information
Figure 12. Validation Steps of SIM Activation
RSK-RX65N-2MB – Quick Start Guide
to activate the SIM card (see section Activating the SIM
Page 13 of 18