Installing A 24Fxs In A 19-Inch Rack - 3Com VCX V7111 Installation Manual

Installing a 24FXS in a 19-inch Rack

3. First attach the two short brackets. To attach either bracket to the 24FXS ,
See Figure
follow these steps:
Unscrew two screws on one side, nearest the front panel. Insert the short bracket's peg
1
in the third air vent down, first column.
Swivel it around until its holes align with the two screw holes. Use the kit's screws to
2
fasten it in. Repeat for the other short bracket on the other side.
Insert the 24FXS into the rack, line up the bracket's holes with the rack frame holes, and
3
use four standard rack screws (not supplied) to secure the brackets to the rack frame.
Cable it as in "Chapter 3: Cabling the VCX
4
24FXS with Brackets for Rack Installation
Figure 3
VCX V7111 Fast Track Installation Guide
V7111" on page 19.
15