Accessing 3Com Embedded Web Server; Setting The Vcx V7111 Ip Address / Subnet Mask - 3Com VCX V7111 Installation Manual

Accessing 3Com Embedded Web Server

To access the embedded web server, follow these steps:
Open any standard Web-browsing application such as Microsoft Internet Explorer
1
(Version. 5.0 and higher) or Netscape Navigator (Version. 7.0 and higher).
Specify the IP address of the VCX 7111 in the Address field (for example,
2
http://10.1.10.10). The Embedded Web Server Enter Network Password screen appears,
as shown in Figure
Embedded Web Server – User Name / Password Screen
Figure 15
Enter the user name (default: Admin) and password (default: Admin) in the fields
3
provided. Note that the User Name and Password fields are case-sensitive.
Click OK. The Quick Setup screen appears, as shown in Figure 16 (SIP).
4

Setting the VCX V7111 IP Address / Subnet Mask

To set the VCX V7111 IP address /subnet mask:
Using the Quick Setup screen in
1
V7111 IP address and subnet mask fields under IP Configuration to correspond with your
network IP address settings.
Click RESET and click OK in the prompt.
2
30
15.
"Provisioning SIP Parameters" as a guide, set the VCX
VCX V7111 Fast Track Installation Guide