Setting The Date/Time - YOKOGAWA DAQSTATION DX100P Operation Manual

Setting the DXP by the Administrator
DX100P
DX100P

Setting the Date/Time

DX100P
22
3.
Enter the user ID and press DISP/ENTER.
A window appears for you to enter the password.
4.
Enter the password and press DISP/ENTER.
The window disappears and you are logged in.
Note
If you repeat the operation of entering a wrong password and pressing
consecutive times, the user is disabled and you are logged out. You can no longer log in
using the same user name. To enable the user so that you can log in again, have the
administrator set a default password and reset the password according to "Logging in for the
First Time."
1.
Press MENU.
The engineering mode menu appears.
2.
On the DX100P, press the
Press the #8 soft
On the DX200P, press the
A window used to set the time appears.
DX200P
DX200P
Next #/# soft key
key.
#6 soft key.
DX200P
DISP/ENTER
to show the menu with [Time].
IM 04L05A01-02E
three