YOKOGAWA DAQSTATION DX100P Operation Manual page 24

Setting the DXP by the Administrator
DX100P
DX100P
DX100P
Key: Operation of keys.
Alarm ACK: Resets alarm indications and alarm relay output.
Media eject: Ejects the Zip disk from the drive.
Batch: Sets batch numbers, lot numbers and enter comments.
Message: Enters messages.
Snapshot: Saves screen image data.
Math: Starts and stops computation and resets computed results
(/M1 option).
24
5.
Set each item.
Login method
Key: Key operation
Key+Com: Key operation and
via communications
Com: via communications
User name
Up to 20 characters.
User ID
Up to 8 characters.
Password
??????: Set to the default pass-
word as defined by the DXP. The
password cannot be changed.
Password expired
After a specified time elapses,
the user will be requested to
change the password.
Login mode
Set the operations that the user
is allowed to carry out using the
login mode number (see step 8).
6.
Press DISP/ENTER.
The settings are confirmed.
7.
Press ESC to return to the screen used to select the registration number.
Set users using the same method as steps 4 through 7.
8.
Press ESC to return to the Admin tool menu.
9.
Press the #4 soft
The login mode setting screen appears.
10.
Set each item.
Number: 1 to 30
Sign record
Set the sign authority level from
[Signature1], [Signature2], and
[Signature3].
Select [Free] for operations
allowed.
DX200P
key.
DX200P
DX200P
Save data: Saves the measurement data file to the external storage
medium.
Load data: Loads and displays the measurement data on the
external storage medium.
E-mail: Starts/stops the e-mail function and executes e-mail
transmission tests.
Other: See section 4.4 of IM04L05A01-01E or IM04L06A01-01E.
IM 04L05A01-02E