Fine Adjustment Setting - Schmalz FS Series Assembly Instructions Manual

6 Operation Instructions
3. Press or
put function.
Accumulated flow external reset = [r_r]
Auto-shift = [r_a]
Auto-shift zero = [r_0]
NOTE:
1. This function is not available with Output
Specification -02 and -04.
2. When external signal is input, the instanta-
neous flow rate value will be shown [oooo].
4. Press button to return to "Function Selec-
tion Mode".
6.15 Fine Adjustment Setting
[F-94] This function is to fine adjust flow and pressure display values. Display values can be calibrated
to within ±2.5% R.D.
1. Fine adjustment of instantaneous flow value
1. Press or
tion Mode" to display [F-94] [ fine].
2. Press button to switch to "Fine Adjustment
Setting".
3. Press or
ment OFF or to set fine adjustment instanta-
neous flow rate value or pressure value.
Fine adjustment function off = [off]
Fine adjustment of pressure value = [pre5]
Fine adjustment of Instantaneous flow rate
value = [ ]
ð is displayed.
4. Press button to select "Fine adjustment of
Instantaneous flow rate value".
ð Display changes to [value] / [F5t ] respec-
tively [0. 0 0] Flashing Alternately
5. Press or
ment value (left display).
NOTE: Right display will flashing between
[0. 0 0] and [f5t].
6. Press button to return to "Measurement
Mode".
36 / 46
button to select external in-
button at "Function Selec-
button to select fine adjust-
button to set fine adjust-
EN-US · 30.30.01.02533 · 02 · 12/22