Reset To The Default Setting; Pressure Zero Adjustment Function; Instantaneous Flow Zero Adjustment Function - Schmalz FS Series Assembly Instructions Manual

6 Operation Instructions
6. Press button to return to "Function Selec-
tion Mode".
6.17 Reset to the Default Setting
[F-99] The factory default settings can be restored.
1. Press or
tion Mode" to display [F-99] [ re5t].
2. Press button to switch to "Reset to The De-
fault Setting".
3. Press or
tory default setting.
Disable = [off]
Enable = [on]
4. Press button to return to "Function Selec-
tion Mode".
6.18 Pressure Zero Adjustment Function
The displayed value can be adjusted to "0" when the pressure is within ±3% of the zero point at the time
of shipment from the factory.
ü Sensor is at measurement mode.
1. Press and
2. Release holding the buttons to return measurement mode.
ð Pressure value return zero.
6.19 Instantaneous Flow Zero Adjustment Function
The displayed value can be adjusted to "0" when the measured flow is within ±10% F.S. of the zero point
at the time of shipment from the factory.
ü Sensor is at measurement mode.
1. Press and
2. Release holding the buttons to return measurement mode.
ð Instantaneous flow value return zero.
38 / 46
button at "Function Selec-
button to return to the fac-
simultaneously over 3 sec. until display [00].
simultaneously over 3 sec. until display [00].
EN-US · 30.30.01.02533 · 02 · 12/22