Table of Contents
Advertisement
6 Operation Instructions
After power is supplied, the output will remain off until the display is turned on. Please operate the sen-
sor after the value is shown.
Stop the control systems before perform setting chnages. During the initial flow and pressure setting, the
product will swich the output according to the existing settings until the changes are complete.
6.1 Function Selection Mode
ü At "Measurement Mode"
1. Press
button for more than 3 sec. to dis-
play [F-01]
select other setting functions
2. Press
for 3 sec. at "Function Setting Mode"
to return to "Measurement Mode".
3. Or press
to enter in each function setting.
6.2 OUT1 Setting Selection
[F01] Setting corresponding sensor and operating mode of OUT1.
1. Flow sensor setting
1. Press
or
Mode" to display [F-01] [ovt1].
2. Press
button to switch to "Sensor Selec-
tion" (oVt1 - selected output).
3. Press
or
of OUT 1.
4. Press
button to switch to "Output Mode
Setting"
EN-US · 30.30.01.02533 · 02 · 12/22
. Press
or
button to
.
button at "Function Setting
button to select flow sensor
1
2
6 Operation Instructions
25 / 46
Advertisement
Table of Contents
