Table of Contents
Advertisement
6 Operation Instructions
6.23 Key Lock / Unlock Mode
To prevent errors occurring due to unintentional changes of the set values. If a button operation is per-
formed while the key lock setting is ON, [Loc] [on] is displayed for 1 sec.
ü Sensor is at measurement mode.
1. Press
button over 5 sec. to select "Key
Lock/Unlock Setting".
2. Press
or
unlocking of the key.
Unlock = [off]
Lock = [on]
NOTE: If a button operation is performed
while the key lock setting is ON, [LoC] [on]
will displayed.
ð Displayed for 1 sec.
40 / 46
button to select locking or
EN-US · 30.30.01.02533 · 02 · 12/22
Advertisement
Table of Contents
