Unit Selection; Flow Reference Standard Selection - Schmalz FS Series Assembly Instructions Manual

6 Operation Instructions
4. Press button to switch to "Display Refresh
Time Selection".
5. Setting response time of pressure sensor: Press
or button to select refresh time.
3 display refresh time selections include:
200ms, 500ms, 1000ms
6. Press button to return to "Function Selec-
tion Mode".
6.7 Unit Selection
[F-06] Select the flow unit and pressure unit of the sensor.
1. Press or
tion Mode" to display [F-06] [vnit].
2. Press button to switch to "Flow Unit Selec-
tion".
3. Press or
2 flow unit selections include:
LPM(L/min), CFM(ft
NOTE: When the measured flow rate range is
500mL/min or 10OOmL/min, the unit of LPM is
selected to represent the unit in mL/min.
4. Press button to switch to "Pressure Unit
Selection".
5. Press or
unit.
4 pressure unit selections include:
2
kPa, kgf/cm , bar, psi
6. Press button to return to "Function Selec-
tion Mode".
6.8 Flow Reference Standard Selection
[F-07] Select the flow value is shown under standard or normal condition.
1. Press or
tion Mode" to display [F-07] [refe].
2. Press button to switch to "Flow Reference
Standard Selection"
32 / 46
button at "Function Selec-
button to select flow unit.
3 -2
/min*10 )
button to select pressure
button at "Function Selec-
EN-US · 30.30.01.02533 · 02 · 12/22