Forced Output Function - Schmalz FS Series Assembly Instructions Manual

2. Fine adjustment of pressure value
1. Press or
tion Mode" to display [F-94] [ fine].
2. Press button to switch to "Fine Adjustment
Setting".
3. Press or
ment OFF or to set fine adjustment instanta-
neous flow rate value or pressure value.
Fine adjustment function off = [off]
Fine adjustment of pressure value = [pre5]
Fine adjustment of Instantaneous flow rate
value = [ ]
ð [pre5] is displayed.
4. Press button to select "Fine Adjustment of
Pressure Value".
ð Display changes to [F5t ] respectively
[0. 0 0] Flashing Alternately / [value]
5. Press or
justment of display value (right display).
NOTE: Left display will flashing between
[0. 0 0] and [f5t].
6. Press button to return to "Measurement
Mode".
6.16 Forced Output Function
[F-95] To turn the analog ON/OFF forcibly.
1. Press or
tion Mode" to display [F-95] [ fovt].
2. Press button to switch to "OUT 1 setting".
3. Press or
OUT1 OFF = [off]
OUT1 ON = [on]
4. Press button to return to "OUT2 setting".
5. Press or
OUT2 OFF = [off]
OUT2 ON = [on]
EN-US · 30.30.01.02533 · 02 · 12/22
button at "Function Selec-
button to select fine adjust-
button to setting fine ad-
button at "Function Selec-
button to setting OUT 1.
button to setting OUT 2.
6 Operation Instructions
37 / 46