Setting The Power-On Password - Epson Equity 386/25 User Manual

4. After you highlight the appropriate display adapter card
type, press Enter. The screen displays your new display
adapter card setting.
5. Highlight * * * SAVE SETTING ** * and press Enter
to return to the main Setup menu.

Setting the Power-on Password

Setting a power-on password lets you control who can use your
computer. However, you do not need to set a power-on
password to use the Equity 386/25. If you do not want to set a
password, skip this section.
If you set a power-on password, you must enter it at the key
prompt (
computer. If you cannot enter it correctly, the computer locks
up and does not respond to your keyboard entries. Therefore, if
you set a power-on password, be sure to remember it or write it
down and keep it in a safe place.
If you want to use your computer as a network server, you can
set your password to operate in network server mode after you
enter the password. (See "Using the Equity 386/25 as a Network
Server" in Chapter 3 for more information.)
Follow these steps to set a power-on password and turn on
network server mode (if necessary):
1. At the main Setup menu, highlight Password. This
submenu appears:
2-12 Running the Setup Program
) the next time you turn on or reset your