Setting the Password Options
The SETUP program lets you set an optional password to
control who can use your system. If you do not want to set a
password for your computer, skip this section.
Once you set a password, you must enter it every time you turn
on or reset your computer. If you do not enter it correctly, you
cannot access your system.
Follow these steps to set a password:
1.
default
2.
The
3.
default setting is mot set.
Press [nl You see thefollowingprompt:
4.
Enter
Type the password you want to use. You can type up to
5.
seven characters using the letter or number keys. For
example, you could enter the following:
123abcd
Do not use characters that require the &) key, such as %,
distinguish between
The characters do not appear on the screen. (You can use
After you type the password, press m
6.
2-16
Running the SETUP Program
Password
Power on
characters that are produced with the