Setting The Power-On Password - Epson 386/25 User Manual

Note
4. After you highlight the appropriate display adapter type,
press
5. Highlight
to return to the main Setup menu.

Setting the Power-on Password

A power-on password is a feature that lets you control who can
access your system. However, you do not need to set a power-on
password to use your computer. If you do not want to set a
password, skip this section.
Once you set a power-on password, you must enter it at the key
prompt (
If you cannot enter it correctly, the computer does not respond
to your keyboard entries. Therefore, if you set a power-on
password, be sure to remember it or write it down and keep it in
a safe place.
If you want to use your computer as a network server, you can
set your password to operate in network server mode. (See
"Using Your Computer as a Network Server" in Chapter 4 for
more information.)
Enter.
The screen displays your new setting.
* * * SAVE SETTING * * * and
) every time you turn on or reset your computer.
Running the Setup Program
Enter
press
2-9