Troubleshooting
Fault – Cause – Remedy
Light system and display mounts
Fault
Independent lowering of the
spring arm.
LEDs on the mains connection component
The LEDs on the mains connection component are
numbered and indicate the status of the light
system.
Supply mains
Emergency power
Output voltage
Initialize in progress
Contact service
Initialize system
System number A
System number B
Instructions for use Polaris 600
Cause
Spring force of the spring arm not
set correctly.
0
0
Troubleshooting
Remedy
Adjust the spring force of the
spring arm, see "Adjusting the
spring arm" on page 83.
67