Table of Contents
Advertisement
Troubleshooting
Message
Check frequency ILV Slave !
Message on the slave device
ILV sync. inop
Message on the slave device
Maintenance
CAUTION !
Maintenance
In case of malfunction of this device, contact
your local DraegerService or our Factory
Authorized Technical Service Center.
The Evita 2 dura ventilator must be inspected
and serviced (preventive maintenance) by com-
petent and factory authorized technical service
representatives at regular 6 month intervals. A
record must be kept on this preventive mainte-
nance. We recommend obtaining a service
contract through your vendor.
Maintenance or repair of the Evita 2 dura ventila-
tor shall be performed only by Draeger autho-
rized technical service representatives.
WARNING !
To avoid any risk of infection, clean and
disinfect ventilator and accessories before any
maintenance according to established hospi-
tal procedures - this applies also when retur-
ning ventilators or parts for repair.
WARNING !
Preventive Maintenance work on the Evita 2
dura ventilator and its components may be
performed by trained and factory authorized
staff only.
Cause
Frequency difference of more than 12 %
between the master and slave devices.
Frequency of the master device less than
!!!
4 / min.
Device defective.
Remedy
Match the slave device frequency to the
master device frequency
Set a higher frequency.
Call DraegerService
WARNING !
Never operate the ventilator if it has suffered
physical damage or does not seem to operate
properly. In this case always refer servicing to
properly trained and factory authorized service
personnel.
Maintenance Intervals
Preventive maintenance Every 6 months by trained
and factory authorized
service personnel.
Functions of the Evita 2 dura Monitoring Plus option are
inspected as part of the scheduled preventive mainte-
nance of the Evita 2 dura ventilator every six months.
Troubleshooting
Maintenance
Maintenance Intervals
17
Advertisement
Table of Contents
