Status Leds - Dräger Polaris 600 Instructions For Use Manual

Status LEDs

The description of this function applies to both the
light control panel and the wall-mounted control
panel. Only the light control panel is shown in the
illustrations.
Status LED for monitoring a light
The status LED (A) for monitoring the light is
situated directly next to the
A
– The status LED (A) is lit green.
The light is in operation.
– The status LED (A) is not lit.
The light is in standby mode.
– The status LED (A) is lit orange.
There is a light system fault, see "Fault –
Cause – Remedy" on page 67.
Instructions for use Polaris 600
Status LED for monitoring the power supply
The status LED (A) for monitoring the power
supply for the light system is located to the left of
the
key.
– The status LED (A) is lit green.
– The status LED (A) is lit orange.
– The status LED (A) is not lit.
key.
A
The light is being supplied with mains power.
The light is being supplied with emergency
power.
The light is not being supplied with power.
Operation
47