Troubleshooting; Technical Data - Dräger Polaris 50 Installation And Operating Instructions Manual

EN

13. TROUBLESHOOTING

Fault
The luminaire doesn't go on
The luminaire doesn't go on
The luminaire doesn't go on

14. TECHNICAL DATA

Electrical data:
Rated connection voltage
Frequency range
Power consumption
Integral electronic transformer
Photometric values*:
Central illuminance Ec at 1.0m distance
Light field diameter d10 at 1.0m distance
Light field diameter d50 at 1.0m distance
Color temperature
Color rendering index Ra
Color rendering index R9
Total irradiance Ee at max. intensity
Ratio of irradiance Ee to illuminance Ec:
Remaining illuminance when dimmed by a shade
Remaining illuminance when dimmed by two shades
Remaining illuminance in tube
Remaining illuminance in tube with one shade
Remaining illuminance in tube with two shades
Depth of illumination L1 + L2
Ambient conditions for transport, storage and operation:
Ambient temperature (storage and transport)
Ambient temperature (operation)
Rel. humidity (non-condensing) (operation)
Maximum altitude of use (operation)
Weight:
Luminaire head
Polaris 50 Ceiling
Polaris 50 Wall
Polaris 50 Mobile
Polaris 50 DVE
152
Possible cause
Contact fault
Lamp defective
No power supply
Correction
Switch on again
Contact manufacturer's service
department
Check voltage, check all
connections
User profile
All
Only by manufacturer's service
department
Qualified electrician
100-240 V
50-60 Hz
32 W (max. 80 VA)
24VDC output
80,000 lx
Ø = 18 cm
Ø = 10 cm
4500K
95
90
2
320 W/m
2
3.6 mW/m /lx
< 1%
50%
100%
< 1%
50%
240 cm
* -10% / +20% tolerance
-20°C to +70°C
+10°C to +35°C
max. 75%
3000 m (above sea level)
3 kg
14 kg
13.5 kg
20 kg
10 kg