Sony Betacam SX DNW-A100 Maintenance Manual page 124

3-2. Details of Error Messages
ERROR-D2 HDD INITIALIZATION ERROR
(HDD INIT ERROR)
Description: Abnormality is detected during the hard disk drives (HDDs) initialization.
Sub error messages and Detecting conditions:
HDD Not Connected(21):
When no response is transmitted from the HDD with respect to the INQUIRY
command to each HDD.
HDD Not Supported(22):
When the responded data is the unsupported device information that transmitted
from the HDD with respect to the INQUIRY command to each HDD.
HDD Unformatted(23):
When a sector capacities is except 4096-byte format.
HDD Illegal Format(24):
File system's data of HDD is not normal.
HDD Incorrect Jumper(25):
When the jumper settings of HDD is not equal to specified settings.
HDD Start Time Over(26):
When the start of HDD is not completed within 2 minutes or when the check
condition error occurs during the SCSI bus initialization.
Wrong Zone (27): (SSX ROM version 3.10 and later)
1. When the zone size stored in the memory of this unit is not coincide with
2. When the desired zone size does not coincide with the current zone size of
Possible causes: HDD Not Connected(21):
. HDD is not installed.
. Illegal setting of HDD's SCSI ID
. Cable or harness (to be connected HDD) trouble or disconnection
. HDD trouble
HDD Not Supported(22): (Refer to No. 1 of Supp. remarks.)
Connection of unsupported HDD
HDD Unformatted(23):
Connection of the extra-specified format HDD
HDD Illegal Format(24): (Refer to No. 2 of Supp. remarks.)
Connection of HDD with unformated of the file system data
HDD Incorrect Jumper(25):(Refer to No. 3 of Supp. remarks.)
Connection of HDD with incorrect jumper settings
HDD Start Time Over(26):
HDD trouble
Wrong Zone (27):
1. Connected another BKNW-116 to this unit.
2. Entailed a change in the zone size of BKNW-116 when changing the zone
3-22
that of the connected BKNW-116. (Version 3.10 and later)
BKNW-116 in changing from INTERNAL to EXT. (Version 3.20 and later)
(Refer to No. 1 of Supp. remarks.)
(Refer to No. 4 of Supp. remarks.)
from INTERNAL to EXT.
(Refer to No. 5 of Supp. remarks.)
DNW-A100/A50/A45
DNW-A100P/A50P/A45P