Disk Maintenance Mode (M1); Outline - Sony Betacam SX DNW-A100 Maintenance Manual

4-3. DISK Maintenance Mode (M1)

4-3-1. Outline

The DISK maintenance mode is used for the maintenance
and check of a hard disk drive. This unit contains the five
menus below.
DISK MAINTENANCE MODE
*
D0:ERROR COUNTER
D1:DEVICE INFO
D2:DIAGNOSIS
D3:INSTALLATION
D4:BLACK INSTALLATION
D5:ZONE CONFIGURATION
D9:DISK CLEANING
Disk program and disk master files are closed when the
DISK maintenance mode is selected.
D0 : ERROR COUNTER
This menu displays the
error generation history of a
hard disk drive.
(Refer to Section 4-3-2.)
D1 : DEVICE INFO
This menu displays the
device information of a
hard disk drive.
(Refer to Section 4-3-3.)
D2 : DIAGNOSIS
This menu measures the
operation performance of a
hard disk drive and displays
the result.
(Refer to Section 4-3-4.)
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
http://getMANUAL.com
DISK MAINTENANCE MODE
D0:ERROR COUNTER
*
[ID-00]
Recoverd 0
Medium 0
Medium(Total) 0
Hardware 0
Others 0
DISK MAINTENANCE MODE
D1:DEVICE INFO
*
[ID-00]
Product Name:
SEAGATE ST19171W
Serial No. : LA136291
SCSI Rev : 02036509
SV ROM Rev : 81718171
SV RAM Rev : 81508150
n
This display is one of the displayed
examples.
DISK MAINTENANCE MODE
D2:DIAGNOSIS
*
OFF
n
The ID number indicated in this section corresponds to the
SCSI ID number. The hard disk drives incorporated into
this unit are assigned to ID-0[ID-00] and ID-1[ID-01]. ID-
2[ID-02] and later are assigned to the hard disk drive of a
hard disk array unit (the products release is not fixed yet)
that is connected to the outside.
D3 : INSTALLATION
This menu initializes the
hard disk drive when a hard
disk drive is connected
newly or by replacement.
(Refer to Section 4-3-5.)
D4 : BLACK INSTALLATION
This menu creates a
BLACK file in the hard
disk.
(Refer to Section 4-3-6.)
D5 : ZONE CONFIGURATION
This menu sets the zone of
the hard disk that this unit
uses as a current zone.
(Refer to Section 4-3-7.)
D9 : DISK CLEANING
This menu cleans the media
error portion (defective
sector) of a hard disk drive.
(Refer to Section 4-3-6.)
4-3. DISK Maintenance Mode (M1)
4-3-1. Outline
DISK MAINTENANCE MODE
*
D3:INSTALLATION
[ID-00] LA136291 ( )
[ID-01] LA046473 ( )
INITIALIZE all the HDDs
marked above at a time.
------------------------
Confirm the serial No.!!
Select all HDDs replaced
while showing (MARK).
n
This display is one of the displayed
examples.
DISK MAINTENANCE MODE
D4:BLACK INSTALLATION
*
OFF
DISK MAINTENANCE MODE
D5:ZONE CONFIGURATION
*
#INTERNAL (1.5H)
EXT FULL (6.0H)
EXT HALF-1 (3.0H)
EXT HALF-2 (3.0H)
EXT QTR -1 (1.5H)
EXT QTR -2 (1.5H)
EXT QTR -3 (1.5H)
EXT QTR -4 (1.5H)
<<current:INTERNAL >>
DISK MAINTENANCE MODE
D9:DISK CLEANING
*
OFF
------ Caution -------
All the user data in
the disk will be lost.
After executing this,
DO NOT TURN POWER OFF!
4-71