Additional Information - Banner SureCross FlexPower DX80 Series Instruction Manual

SureCross DX80 FlexPower Thermocouple Node
Wiring Diagram for Thermocouple Inputs
SureCross Device
Ax+
Ax−
Wiring Diagram for Thermistor Inputs
A4+
A4−
Supported Thermocouple Types
The Thermocouple Node supports up to three thermocouple inputs and defaults to the J-type thermocouple. The following thermocouples
are available by configuring the Node.
Thermocouple
Type B
Type C
Type E
Type J
Type K
Type L
Type N
Type R
Type S
Type T
Type U

Additional Information

For additional information, including installation and setup, weatherproofing, device menu maps, troubleshooting, and a list of accesso-
ries, refer to one of the following product manuals
• SureCross Quick Start Guide: Banner part number
• SureCross Wireless I/O Network Manual:
• Web Configurator Manual (used with "Pro" and DX83 models):
P/N 131297 rev. I
Thermocouple: When wiring the thermocouple, x is the same number. For ex-
ample, a thermocouple is wired to A1+ and A1-.
+
TC
−
The thermistor at A4 is used for cold junction compensation. If the ther-
mistor is removed, all other analog temperature points will read "alarm."
Thermistor model Number: BWA-THERMISTOR-001.
212 to 3,272 °F
32 to 4,208 °F
-58 to 1,832 °F
-292 to 1,382 °F
-292 to 2,282 °F
-328 to 1,652 °F
32 to 2,192 °F
32 to 2,912 °F
32 to 2,642 °F
-238 to 752 °F
-148 to 1,112 °F
128185
132607
www.bannerengineering.com - tel: 763-544-3164
Range °F
134421
Range °C
100 to 1,800 °C
0 to 2,320 °C
-50 to 1,000 °C
-180 to 750 °C
-180 to 1,250 °C
-200 to 900 °C
0 to 1,200 °C
0 to 1,600 °C
0 to 1,450 °C
-150 to 400 °C
-100 to 600 °C
5