Additional Information For The Gatewaypro And Dx83 Models; Web-Based Configuration - Banner Sure Cross DX80 Instruction Manual

10 Additional Information for the GatewayPro and
DX83 Models
The following sections are specific to the GatewayPro and DX83 Ethernet Bridge models and do not apply to the DXM
Wireless Controller series.

10.1 Web-based Configuration

The SureCross wireless systems are configured using an Ethernet network connection and a common Web page browser.
An Ethernet connection can be established from a GatewayPro or from a DX83 Ethernet Bridge serially connected to the
Gateway.
The Ethernet Bridge and GatewayPro each ship with an Ethernet crossover cable. One end of the cable is a RJ45 connector
and the other end is an industrial Ethernet connector. This cable is designed to be connected directly to a computer.
10.1 Example Layout #1
When connecting a Gateway to a host system, the wireless network must be configured using the User Configuration Tool
(UCT). When you are not using a GatewayPro or Ethernet Bridge, you cannot configure the wireless network using the Web
Configurator.
1
Host
2
10.1 Example Layout #2
This system uses a GatewayPro connected directly to a host system using an Ethernet crossover cable. This system can be
configured using the web pages.
3
www.bannerengineering.com - Tel: +1.763.544.3164
®
Sure Cross Radio Networks and Host Controller Systems
1. Power connection
2. Splitter cable and Modbus RTU communication
3. Gateway
37