Banner SureCross Series Manual

SureCross Temperature Probe with DX80 Node
Configurable temperature Node with thermocouple inputs and a battery integrated into the housing, mounted on a probe
For additional information, the most recent version of all documentation, and a complete list of accessories, refer to Banner Engineering's
website, www.bannerengineering.com/surecross.
Models Description
BWA-TPROBE-001
Wireless DX80 Node and temperature
probe
BWA-TPROBE-002
DX80N9C-16999
DX80 Node (no probe assembly)
DX80N2C-16997
These Nodes are powered by an internal battery. All batteries must be ordered separately.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does NOT include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
The SureCross® DX80 Wireless Network
The SureCross® DX80 wireless I/O network provides reliable monitoring without the burden of wiring or conduit installation. The Sure-
Cross wireless network can operate independently or in conjunction with a host system, PLC, and/or PC software.
Each wireless network system consists of one Gateway and one or more Nodes. Devices ship with factory defined inputs and outputs
that may be all discrete, all analog, or a mix of discrete and analog I/O.
P/N 156525 rev. -
The SureCross® wireless system is a radio frequency network with integrated I/O that
can operate in most environments and eliminate the need for wiring runs. Wireless net-
works are formed around a Gateway, which acts as the wireless network master device,
and one or more Nodes.
This temperature probe is designed for measuring the temperature at three different
depths of a compost pile. A DX80 Node with a battery integrated into the housing trans-
mits the temperature readings to a Gateway.
• Wireless industrial I/O device with three thermocouple inputs
• FlexPower® technology driven by one lithium primary battery integrated into the
housing
• DIP switches for user configuration
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multi-
ple Access (TDMA) control architecture ensure reliable data delivery within the unli-
censed Industrial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node,
including fully acknowledged data transmission
• Internal antenna
Frequency
900 MHz ISM Band
2.4 GHz ISM Band
900 MHz ISM Band
2.4 GHz ISM Band
3/15/2013
I/O
Inputs: Three thermocouple
0 156525 6