External Device - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
The device works with all the functions enabled.
Proactive Mode
The device DSP works normally. It records the videos with the main stream at the half frame
rate, and supports the remote login, preview and the configuration.
Low Power Sleep
When the device power is lower than Threshold of Low Power Sleep Mode, the device enters
sleep mode.
When the device power is recovered to 10% above the threshold, the device enters the user
configuration mode.
Scheduled Sleep
If the device is during Scheduled Sleep Time, it enters the sleep mode, otherwise it enters the
user configuration mode.
NOTE: For the scheduled sleep schedule settings, see Set Arming Schedule .
The device supports the timing wake. For the details, see Set Timing Wake .

4.9.17 External Device

For the device supporting external devices, including the supplement light, wiper on the housing, the
LED light, and heater, you can control them via the Web browser when it is used with the housing.
External devices vary with models.
Supplement Light Settings
You can set supplement light and refer to the actual device for relevant parameters.
Smart Supplement Light
Smart supplement light avoids over exposure when the supplement light is on.
Supplement Light Mode
When the device supports supplement light, you can select supplement light mode.
IR Mode
IR light is enabled.
White Light Mode
White light is enabled.
Mix Mode
Both IR light and white light are enabled.
Off
Supplement light is disabled.
Brightness Adjustment Mode
Auto
The brightness adjusts according to the actual environment automatically.
Manual
You can drag the slider or set value to adjust the brightness.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 81
The Netherlands