Upgrade; Device Auto Maintenance; View Open Source Software License - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
NOTE: Be careful when using this function. After resetting to the factory default, all the
parameters are reset to the default settings.

4.9.8 Upgrade

Before You Start
You need to obtain the correct upgrade package.
NOTE: DO NOT disconnect power during the process, and the device reboots
automatically after upgrade.
Steps
1. Go to Configuration → System → Maintenance → Upgrade & Maintenance .
2. Choose one method to upgrade.
Firmware
Firmware Directory
3. Click Browse to select the upgrade file.
4. Click Upgrade.

4.9.9 Device Auto Maintenance

Steps
1. Check Enable Auto Maintenance.
2. Read the prompt information and click OK.
3. Select the date and time you want to restart the device.
4. Click Save.
NOTE: The function is only available for Administrator.
After enabling auto maintenance, the device will automatically restart according to the maintenance
plan. The device cannot record video during the restarting process.

4.9.10 View Open Source Software License

TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
Locate the exact path of the upgrade file.
Locate the directory which the upgrade file belongs to.
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 77
The Netherlands