Set Alarm Server; Arming Schedule And Alarm Linkage; Set Arming Schedule - TKH security BL2002PID User Manual

Our Brands: FlinQ | iProtect | Park Assist | ParkEyes | Siqura | VDG
Installations in over 80 countries
3. Select Enable.
4. Select a protocol version and input related parameters.
5. Click Save.
Register status turns to Online when the function is correctly set.

4.7.13 Set Alarm Server

The device can send alarms to destination IP address or host name through HTTP, HTTPS, or
ISUP protocol. The destination IP address or host name should support HTTP, HTTP, or ISUP data
transmission.
Steps
1. Go to Configuration → Network → Advanced Settings → Alarm Server .
2. Enter Destination IP or Host Name, URL, and Port.
3. Optional: Check Enable to enable ANR.
4. Select Protocol.
NOTE: HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as
it encrypts the data transmission during communication.
5. Click Test to check if the IP or host is available.
6. Click Save.

4.8 Arming Schedule and Alarm Linkage

Arming schedule is a customized time period in which the device performs certain tasks. Alarm
linkage is the response to the detected certain incident or target during the scheduled time.

4.8.1 Set Arming Schedule

Set the valid time of the device tasks.
Steps
1. Click Arming Schedule.
2. Drag the time bar to draw desired valid time.
NOTE: Up to 8 periods can be configured per day.
TKH Security B.V. | +31 182 592 333 | info.nl@tkhsecurity.com | tkhsecurity.com
BL2002PID
User ManualBL2002PID
January 4, 2021 Meridiaan 32
2801 DA, Gouda
Page 71
The Netherlands